ActiveMQ Artemis has a Command Line Interface (CLI) that can used to manage a few aspects of the broker like instance creation, basic user management, queue & address management, etc.
There are two ways the CLI can be used:
-
Traditional CLI commands, e.g.:
./artemis [COMMAND] [PARAMETERS] -
A custom shell that is accesssed using the
./artemisor./artemis shellcommands.
All commands available through the traditional CLI commands are also available through the shell interface.
One benefit of the traditional CLI commands is that they can be used in your own bash scripts for automation, etc.
One benefit of the shell is that it will reuse some information as you repeat commands.
For example, once you supply the broker URI and username & password to one command those values will be transparently applied other commands in the same shell session.
Of course, the shell also allows you to avoid retyping ./artemis for every command.
1. Getting Help
You can get a complete list of available commands by typing:
$ ./artemis help
Usage: artemis [COMMAND]
ActiveMQ Artemis Command Line
Commands:
help use 'help <command>' for more information
auto-complete Generates the auto complete script file to be used in bash or
zsh.
shell JLine3 shell helping using the CLI
producer Send message(s) to a broker.
transfer Move messages from one destination towards another destination.
consumer Consume messages from a queue.
browser Browse messages on a queue.
mask Mask a password and print it out.
version Print version information.
perf use 'help perf' for sub commands list
check use 'help check' for sub commands list
queue use 'help check' for sub commands list
address use 'help address' for sub commands list
data use 'help data' for sub commands list
create Create a new broker instance.
upgrade Update a broker instance to the current artemis.home, keeping
all the data and broker.xml. Warning: backup your instance
before using this command and compare the files.It is also possible to use help at a specific command or sub-command for more information.
For example, to get a list of sub-commands for data you type ./artemis help data:
$ ./artemis help data
Usage: artemis data [COMMAND]
use 'help data' for sub commands list
Commands:
recover Recover (undelete) every message on the journal by creating a new
output journal. Rolled back and acked messages will be sent out to
the output as much as possible.
print Print data records information. WARNING: don't use while a
production server is running.
exp Export all message-data using an XML that could be interpreted by
any system.
imp Import all message-data using an XML that could be interpreted by
any system.
decode Decode a journal's internal format into a new set of journal files.
encode Encode a set of journal files into an internal encoded data format.
compact Compact the journal of a non running server.Or you can get help for a particular command.
For example, ./artemis help create:
Usage: artemis create [--aio] [--allow-anonymous] [--autocreate] [--autodelete]
[--backup] [--blocking] [--clustered]
[--disable-persistence] [--failover-on-shutdown]
[--force] [--jdbc] [--linux] [--mapped] [--nio]
[--no-amqp-acceptor] [--no-autocreate] [--no-autotune]
[--no-fsync] [--no-hornetq-acceptor] [--no-mqtt-acceptor]
[--no-stomp-acceptor] [--no-web] [--paging]
[--relax-jolokia] [--replicated] [--require-login]
[--shared-store] [--silent] [--slave]
[--support-advisory]
[--suppress-internal-management-objects]
[--use-client-auth] [--verbose] [--windows]
[--addresses=<addresses>]
[--cluster-password=<clusterPassword>]
[--cluster-user=<clusterUser>] [--data=<data>]
[--default-port=<defaultPort>] [--encoding=<encoding>]
[--etc=<etc>] [--global-max-messages=<globalMaxMessages>]
[--global-max-size=<globalMaxSize>] [--home=<home>]
[--host=<host>] [--http-host=<httpHost>]
[--http-port=<httpPort>] [--java-memory=<javaMemory>]
[--jdbc-bindings-table-name=<jdbcBindings>]
[--jdbc-connection-url=<jdbcURL>]
[--jdbc-driver-class-name=<jdbcClassName>]
[--jdbc-large-message-table-name=<jdbcLargeMessages>]
[--jdbc-lock-expiration=<jdbcLockExpiration>]
[--jdbc-lock-renew-period=<jdbcLockRenewPeriod>]
[--jdbc-message-table-name=<jdbcMessages>]
[--jdbc-network-timeout=<jdbcNetworkTimeout>]
[--jdbc-node-manager-table-name=<jdbcNodeManager>]
[--jdbc-page-store-table-name=<jdbcPageStore>]
[--journal-device-block-size=<journalDeviceBlockSize>]
[--journal-retention=<retentionDays>]
[--journal-retention-max-bytes=<retentionMaxBytes>]
[--max-hops=<maxHops>]
[--message-load-balancing=<messageLoadBalancing>]
[--name=<name>] [--password=<password>] [--ping=<ping>]
[--port-offset=<portOffset>] [--queues=<queues>]
[--role=<role>] [--security-manager=<securityManager>]
[--ssl-key=<sslKey>]
[--ssl-key-password=<sslKeyPassword>]
[--ssl-trust=<sslTrust>]
[--ssl-trust-password=<sslTrustPassword>]
[--staticCluster=<staticNode>] [--user=<user>]
[--java-options=<javaOptions>]... <directory>
Create a new broker instance.
<directory> The instance directory to hold the broker's
configuration and data. Path must be writable.
--addresses=<addresses>
A comma separated list of addresses with the
option to specify a routing type, e.g.
--addresses myAddress1,myAddress2:anycast.
Routing-type default: multicast.
--aio Set the journal as asyncio.
--allow-anonymous Allow connections from users with no security
credentials. Opposite of --require-login.
Default: input.
--autocreate Allow automatic creation of addresses & queues.
Default: true.
--autodelete Allow automatic deletion of addresses & queues.
Default: false.
--backup Be a backup broker. Valid for shared store or
replication.
--blocking Block producers when address becomes full.
Opposite of --paging. Default: false.
--cluster-password=<clusterPassword>
The password to use for clustering. Default: input.
--cluster-user=<clusterUser>
The user to use for clustering. Default: input.
--clustered Enable clustering.
--data=<data> Directory where ActiveMQ data are stored. Paths
can be absolute or relative to artemis.instance
directory. Default: data.
--default-port=<defaultPort>
The port number to use for the main 'artemis'
acceptor. Default: 61616.
--disable-persistence Disable message persistence to the journal
--encoding=<encoding> The encoding that text files should use. Default:
UTF-8.
--etc=<etc> Directory where ActiveMQ configuration is located.
Paths can be absolute or relative to artemis.
instance directory. Default: etc.
--failover-on-shutdown Whether broker shutdown will trigger failover for
clients using the core protocol. Valid only for
shared store. Default: false.
--force Overwrite configuration at destination directory.
--global-max-messages=<globalMaxMessages>
Maximum number of messages that will be accepted
in memory before using address full policy mode.
Default: undefined.
--global-max-size=<globalMaxSize>
Maximum amount of memory which message data may
consume. Default: half of the JVM's max memory.
--home=<home> Directory where ActiveMQ Artemis is installed.
--host=<host> Broker's host name. Default: 0.0.0.0 or input if
clustered).
--http-host=<httpHost> Embedded web server's host name. Default:
localhost.
--http-port=<httpPort> Embedded web server's port. Default: 8161.
--java-memory=<javaMemory>
Define the -Xmx memory parameter for the broker.
Default: 2G.
--java-options=<javaOptions>
Extra Java options to be passed to the profile.
--jdbc Store message data in JDBC instead of local files.
--jdbc-bindings-table-name=<jdbcBindings>
Name of the jdbc bindings table.
--jdbc-connection-url=<jdbcURL>
The URL used for the database connection.
--jdbc-driver-class-name=<jdbcClassName>
JDBC driver classname.
--jdbc-large-message-table-name=<jdbcLargeMessages>
Name of the large messages table.
--jdbc-lock-expiration=<jdbcLockExpiration>
Lock expiration (in milliseconds).
--jdbc-lock-renew-period=<jdbcLockRenewPeriod>
Lock Renew Period (in milliseconds).
--jdbc-message-table-name=<jdbcMessages>
Name of the jdbc messages table.
--jdbc-network-timeout=<jdbcNetworkTimeout>
Network timeout (in milliseconds).
--jdbc-node-manager-table-name=<jdbcNodeManager>
Name of the jdbc node manager table.
--jdbc-page-store-table-name=<jdbcPageStore>
Name of the page store messages table.
--journal-device-block-size=<journalDeviceBlockSize>
The block size of the journal's storage device.
Default: 4096.
--journal-retention=<retentionDays>
Configure journal retention in days. If > 0 then
enable journal-retention-directory from broker.
xml allowing replay options.
--journal-retention-max-bytes=<retentionMaxBytes>
Maximum number of bytes to keep in the retention
directory.
--linux, --cygwin Force Linux or Cygwin script creation. Default:
based on your actual system.
--mapped Set the journal as mapped.
--max-hops=<maxHops> Number of hops on the cluster configuration.
--message-load-balancing=<messageLoadBalancing>
Message load balancing policy for cluster.
Default: ON_DEMAND. Valid values: ON_DEMAND,
STRICT, OFF, OFF_WITH_REDISTRIBUTION.
--name=<name> The name of the broker. Default: same as host name.
--nio Set the journal as nio.
--no-amqp-acceptor Disable the AMQP specific acceptor.
--no-autocreate Disable auto creation for addresses & queues.
--no-autotune Disable auto tuning of the journal-buffer-timeout
in broker.xml.
--no-fsync Disable usage of fdatasync (channel.force(false)
from Java NIO) on the journal.
--no-hornetq-acceptor Disable the HornetQ specific acceptor.
--no-mqtt-acceptor Disable the MQTT specific acceptor.
--no-stomp-acceptor Disable the STOMP specific acceptor.
--no-web Whether to omit the web-server definition from
bootstrap.xml.
--paging Page messages to disk when address becomes full.
Opposite of --blocking. Default: true.
--password=<password> The user's password. Default: input.
--ping=<ping> A comma separated string to be passed on to the
broker config as network-check-list. The broker
will shutdown when all these addresses are
unreachable.
--port-offset=<portOffset>
How much to off-set the ports of every acceptor.
--queues=<queues> A comma separated list of queues with the option
to specify a routing type, e.g. --queues
myQueue1,myQueue2:multicast. Routing-type
default: anycast.
--relax-jolokia Disable strict checking in jolokia-access.xml.
--replicated Enable broker replication.
--require-login Require security credentials from users for
connection. Opposite of --allow-anonymous.
--role=<role> The name for the role created. Default: amq.
--security-manager=<securityManager>
Which security manager to use - jaas or basic.
Default: jaas.
--shared-store Enable broker shared store.
--silent Disable all the inputs, and make a best guess for
any required input.
--slave Deprecated for removal. Use 'backup' instead.
--ssl-key=<sslKey> Embedded web server's key store path.
--ssl-key-password=<sslKeyPassword>
The key store's password.
--ssl-trust=<sslTrust> The trust store path in case of client
authentication.
--ssl-trust-password=<sslTrustPassword>
The trust store's password.
--staticCluster, --static-cluster=<staticNode>
Cluster node connectors list separated by comma, e.
g. "tcp://server:61616,tcp://server2:61616,tcp:
//server3:61616".
--support-advisory Support advisory messages for the OpenWire
protocol.
--suppress-internal-management-objects
Do not register any advisory addresses/queues for
the OpenWire protocol with the broker's
management service.
--use-client-auth Require client certificate authentication when
connecting to the embedded web server.
--user=<user> The username. Default: input.
--verbose Print additional information.
--windows Force Windows script creation. Default: based on
your actual system.2. Bash and Zsh auto complete
Bash and Zsh provide ways to auto-complete commands. To integrate with that functionality you have the option to generate the auto-complete script, i.e.:
$ ./artemis auto-completeThis will generate a file named auto-complete-artemis.sh that can be installed using:
$ source ./auto-complete-artemis.shAfter the auto-completion is installed you can view auto-completion information by pressing TAB:
$ ./artemis
activation browser create kill perf-journal run transfer version
address check data mask producer shell upgrade
auto-complete consumer help perf queue stop userIn order to see the various parameters available you must type -- then press TAB:
$ ./artemis create --
--addresses --jdbc-bindings-table-name --paging
--aio --jdbc-connection-url --password
--allow-anonymous --jdbc-driver-class-name --ping
--autocreate --jdbc-large-message-table-name --port-offset
--autodelete --jdbc-lock-expiration --queues
--blocking --jdbc-lock-renew-period --relax-jolokia
--cluster-password --jdbc-message-table-name --replicated
--cluster-user --jdbc-network-timeout --require-login
--clustered --jdbc-node-manager-table-name --role3. Input required
Some functionality may require interactive user input if not explicitly provided through a parameter. For example, in cases like connecting to a broker or creating the broker instance:
$ ./artemis queue stat
Connection brokerURL = tcp://localhost:61616
Connection failed::AMQ229031: Unable to validate user from /127.0.0.1:56320. Username: null; SSL certificate subject DN: unavailable
--user:
Type the username for a retry
myUser
--password: is mandatory with this configuration:
Type the password for a retry4. Artemis Shell
To initialize the shell session, type ./artemis shell (or just ./artemis if you prefer):
$ ./artemisThe ActiveMQ Artemis shell provides an interface that can be used to execute commands directly without leaving the Java Virtual Machine.
_ _ _
/ \ ____| |_ ___ __ __(_) _____
/ _ \| _ \ __|/ _ \ \/ | |/ __/
/ ___ \ | \/ |_/ __/ |\/| | |\___ \
/_/ \_\| \__\____|_| |_|_|/___ /
Apache ActiveMQ Artemis
For a list of commands, type help or press <TAB>:
Type exit or press <CTRL-D> to leave the session:
Apache ActiveMQ Artemis >4.1. Connecting Interactively
It is possible to authenticate your CLI client once to the server and reuse the connection information for additional commands:
Apache ActiveMQ Artemis > connect --user=myUser --password=myPass --url tcp://localhost:61616
Connection brokerURL = tcp://localhost:61616
Connection Successful!Now any command requiring authentication will reuse these parameters.
For example the sub-command queue stat will reuse previous information to perform its connection to the broker.
Apache ActiveMQ Artemis > queue stat
Connection brokerURL = tcp://localhost:61616
|NAME |ADDRESS |CONSUMER_COUNT|MESSAGE_COUNT|MESSAGES_ADDED|DELIVERING_COUNT|MESSAGES_ACKED|SCHEDULED_COUNT|ROUTING_TYPE|
|DLQ |DLQ |0 |0 |0 |0 |0 |0 |ANYCAST |
|ExpiryQueue |ExpiryQueue |0 |0 |0 |0 |0 |0 |ANYCAST |
|Order |Order |0 |4347 |4347 |0 |0 |0 |ANYCAST |
|activemq.management.0b...|activemq.management.0b...|1 |0 |0 |0 |0 |0 |MULTICAST |4.2. Connecting Statically
It is possible to start the shell with an initial connection configured statically, e.g.:
$ ./artemis shell --user <username> --password <password> --url tcp://<hostname>:<port>The CLI should not ask for a the broker URL or user/password for any further commands, e.g.:
$ ./artemis shell --user myUser --password myPass
...
Apache ActiveMQ Artemis > queue stat
Connection brokerURL = tcp://localhost:61616
|NAME |ADDRESS |CONSUMER_COUNT|MESSAGE_COUNT|MESSAGES_ADDED|DELIVERING_COUNT|MESSAGES_ACKED|SCHEDULED_COUNT|ROUTING_TYPE|
|DLQ |DLQ |0 |0 |0 |0 |0 |0 |ANYCAST |
|ExpiryQueue |ExpiryQueue |0 |0 |0 |0 |0 |0 |ANYCAST |
|TEST |TEST |0 |8743 |8743 |0 |0 |0 |ANYCAST |
|activemq.management.2a...|activemq.management.2a...|1 |0 |0 |0 |0 |0 |MULTICAST |