java.lang.Object
- org.apache.activemq.ActiveMQSession

All Implemented Interfaces:

Runnable, QueueSession, Session, TopicSession, ActiveMQDispatcher, StatsCapable

Direct Known Subclasses:

ActiveMQXASession
```
public class ActiveMQSession
extends Object
implements Session, QueueSession, TopicSession, StatsCapable, ActiveMQDispatcher
```
A Session object is a single-threaded context for producing and consuming messages. Although it may allocate provider resources outside the Java virtual machine (JVM), it is considered a lightweight JMS object.
A session serves several purposes:
- It is a factory for its message producers and consumers.
- It supplies provider-optimized message factories.
- It is a factory for TemporaryTopics and TemporaryQueues.
- It provides a way to create Queue or Topic objects for those clients that need to dynamically manipulate provider-specific destination names.
- It supports a single series of transactions that combine work spanning its producers and consumers into atomic units.
- It defines a serial order for the messages it consumes and the messages it produces.
- It retains messages it consumes until they have been acknowledged.
- It serializes execution of message listeners registered with its message consumers.
- It is a factory for QueueBrowsers.
A session can create and service multiple message producers and consumers.
One typical use is to have a thread block on a synchronous MessageConsumer until a message arrives. The thread may then use one or more of the Session'sMessageProducers.
If a client desires to have one thread produce messages while others consume them, the client should use a separate session for its producing thread.
Once a connection has been started, any session with one or more registered message listeners is dedicated to the thread of control that delivers messages to it. It is erroneous for client code to use this session or any of its constituent objects from another thread of control. The only exception to this rule is the use of the session or connection close method.
It should be easy for most clients to partition their work naturally into sessions. This model allows clients to start simply and incrementally add message processing complexity as their need for concurrency grows.
The close method is the only session method that can be called while some other session method is being executed in another thread.
A session may be specified as transacted. Each transacted session supports a single series of transactions. Each transaction groups a set of message sends and a set of message receives into an atomic unit of work. In effect, transactions organize a session's input message stream and output message stream into series of atomic units. When a transaction commits, its atomic unit of input is acknowledged and its associated atomic unit of output is sent. If a transaction rollback is done, the transaction's sent messages are destroyed and the session's input is automatically recovered.
The content of a transaction's input and output units is simply those messages that have been produced and consumed within the session's current transaction.
A transaction is completed using either its session's commit method or its session's rollback method. The completion of a session's current transaction automatically begins the next. The result is that a transacted session always has a current transaction within which its work is done.
The Java Transaction Service (JTS) or some other transaction monitor may be used to combine a session's transaction with transactions on other resources (databases, other JMS sessions, etc.). Since Java distributed transactions are controlled via the Java Transaction API (JTA), use of the session's commit and rollback methods in this context is prohibited.
The JMS API does not require support for JTA; however, it does define how a provider supplies this support.
Although it is also possible for a JMS client to handle distributed transactions directly, it is unlikely that many JMS clients will do this. Support for JTA in the JMS API is targeted at systems vendors who will be integrating the JMS API into their application server products.
See Also:

Session, QueueSession, TopicSession, XASession

Nested Class Summary

Nested Classes
Modifier and Type Class Description

static interface ActiveMQSession.DeliveryListener

Field Summary

Fields
Modifier and Type	Field	Description
`protected int`	`acknowledgementMode`
`protected boolean`	`asyncDispatch`
`protected boolean`	`closed`
`protected ActiveMQConnection`	`connection`
`protected LongSequenceGenerator`	`consumerIdGenerator`
`protected CopyOnWriteArrayList<ActiveMQMessageConsumer>`	`consumers`
`protected boolean`	`debug`
`protected LongSequenceGenerator`	`deliveryIdGenerator`
`protected ActiveMQSessionExecutor`	`executor`
`static int`	`INDIVIDUAL_ACKNOWLEDGE`	Only acknowledge an individual message - using message.acknowledge() as opposed to CLIENT_ACKNOWLEDGE which acknowledges all messages consumed by a session at when acknowledge() is called
`protected SessionInfo`	`info`
`static int`	`MAX_ACK_CONSTANT`
`protected LongSequenceGenerator`	`producerIdGenerator`
`protected CopyOnWriteArrayList<ActiveMQMessageProducer>`	`producers`
`protected Object`	`redeliveryGuard`
`protected Object`	`sendMutex`
`protected boolean`	`sessionAsyncDispatch`
`protected AtomicBoolean`	`started`

Fields inherited from interface javax.jms.Session
AUTO_ACKNOWLEDGE, CLIENT_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE, SESSION_TRANSACTED

Constructor Summary

Constructors
Modifier	Constructor	Description
`protected`	`ActiveMQSession(ActiveMQConnection connection, SessionId sessionId, int acknowledgeMode, boolean asyncDispatch)`
`protected`	`ActiveMQSession(ActiveMQConnection connection, SessionId sessionId, int acknowledgeMode, boolean asyncDispatch, boolean sessionAsyncDispatch)`	Construct the Session

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`void`	`acknowledge()`	Acknowledges all consumed messages of the session of this consumed message.
`protected void`	`addConsumer(ActiveMQMessageConsumer consumer)`	Add a message consumer.
`protected void`	`addProducer(ActiveMQMessageProducer producer)`	Adds a message producer.
`void`	`asyncSendPacket(Command command)`	Send the asynchronous command.
`protected void`	`checkClosed()`	Check if the session is closed.
`void`	`checkMessageListener()`
`void`	`close()`	Closes the session.
`protected void`	`close(ConsumerId id)`
`void`	`commit()`	Commits all messages done in this transaction and releases any locks currently held.
`protected void`	`configureMessage(ActiveMQMessage message)`	Checks that the session is not closed then configures the message
`BlobMessage`	`createBlobMessage(File file)`	Creates an initialized `BlobMessage` object.
`BlobMessage`	`createBlobMessage(InputStream in)`	Creates an initialized `BlobMessage` object.
`BlobMessage`	`createBlobMessage(URL url)`	Creates an initialized `BlobMessage` object.
`BlobMessage`	`createBlobMessage(URL url, boolean deletedByBroker)`	Creates an initialized `BlobMessage` object.
`QueueBrowser`	`createBrowser(Queue queue)`	Creates a `QueueBrowser` object to peek at the messages on the specified queue.
`QueueBrowser`	`createBrowser(Queue queue, String messageSelector)`	Creates a `QueueBrowser` object to peek at the messages on the specified queue using a message selector.
`BytesMessage`	`createBytesMessage()`	Creates a `BytesMessage` object.
`MessageConsumer`	`createConsumer(Destination destination)`	Creates a `MessageConsumer` for the specified destination.
`MessageConsumer`	`createConsumer(Destination destination, String messageSelector)`	Creates a `MessageConsumer` for the specified destination, using a message selector.
`MessageConsumer`	`createConsumer(Destination destination, String messageSelector, boolean noLocal)`	Creates `MessageConsumer` for the specified destination, using a message selector.
`MessageConsumer`	`createConsumer(Destination destination, String messageSelector, boolean noLocal, MessageListener messageListener)`	Creates `MessageConsumer` for the specified destination, using a message selector.
`MessageConsumer`	`createConsumer(Destination destination, String messageSelector, MessageListener messageListener)`	Creates a `MessageConsumer` for the specified destination, using a message selector.
`MessageConsumer`	`createConsumer(Destination destination, MessageListener messageListener)`	Creates a `MessageConsumer` for the specified destination.
`TopicSubscriber`	`createDurableSubscriber(Topic topic, String name)`	Creates a durable subscriber to the specified topic.
`TopicSubscriber`	`createDurableSubscriber(Topic topic, String name, String messageSelector, boolean noLocal)`	Creates a durable subscriber to the specified topic, using a message selector and specifying whether messages published by its own connection should be delivered to it.
`MapMessage`	`createMapMessage()`	Creates a `MapMessage` object.
`Message`	`createMessage()`	Creates a `Message` object.
`ObjectMessage`	`createObjectMessage()`	Creates an `ObjectMessage` object.
`ObjectMessage`	`createObjectMessage(Serializable object)`	Creates an initialized `ObjectMessage` object.
`MessageProducer`	`createProducer(Destination destination)`	Creates a `MessageProducer` to send messages to the specified destination.
`TopicPublisher`	`createPublisher(Topic topic)`	Creates a publisher for the specified topic.
`Queue`	`createQueue(String queueName)`	Creates a queue identity given a `Queue` name.
`QueueReceiver`	`createReceiver(Queue queue)`	Creates a `QueueReceiver` object to receive messages from the specified queue.
`QueueReceiver`	`createReceiver(Queue queue, String messageSelector)`	Creates a `QueueReceiver` object to receive messages from the specified queue using a message selector.
`QueueSender`	`createSender(Queue queue)`	Creates a `QueueSender` object to send messages to the specified queue.
`StreamMessage`	`createStreamMessage()`	Creates a `StreamMessage` object.
`TopicSubscriber`	`createSubscriber(Topic topic)`	Creates a nondurable subscriber to the specified topic.
`TopicSubscriber`	`createSubscriber(Topic topic, String messageSelector, boolean noLocal)`	Creates a nondurable subscriber to the specified topic, using a message selector or specifying whether messages published by its own connection should be delivered to it.
`TemporaryQueue`	`createTemporaryQueue()`	Creates a `TemporaryQueue` object.
`TemporaryTopic`	`createTemporaryTopic()`	Creates a `TemporaryTopic` object.
`TextMessage`	`createTextMessage()`	Creates a `TextMessage` object.
`TextMessage`	`createTextMessage(String text)`	Creates an initialized `TextMessage` object.
`Topic`	`createTopic(String topicName)`	Creates a topic identity given a `Topic` name.
`void`	`dispatch(MessageDispatch messageDispatch)`
`void`	`dispose()`
`protected void`	`doStartTransaction()`	Send TransactionInfo to indicate transaction has started
`int`	`getAcknowledgeMode()`	Returns the acknowledgement mode of the session.
`BlobTransferPolicy`	`getBlobTransferPolicy()`
`ActiveMQConnection`	`getConnection()`
`protected ThreadPoolExecutor`	`getConnectionExecutor()`
`ActiveMQSession.DeliveryListener`	`getDeliveryListener()`	Returns the message delivery listener.
`long`	`getLastDeliveredSequenceId()`	highest sequence id of the last message delivered by this session.
`MessageListener`	`getMessageListener()`	Returns the session's distinguished message listener (optional).
`protected ConsumerId`	`getNextConsumerId()`
`long`	`getNextDeliveryId()`
`protected ProducerId`	`getNextProducerId()`
`protected Scheduler`	`getScheduler()`
`protected SessionId`	`getSessionId()`	Returns the session id.
`protected SessionInfo`	`getSessionInfo()`	Returns the SessionInfo bean.
`JMSSessionStatsImpl`	`getSessionStats()`	Returns the session's statistics.
`StatsImpl`	`getStats()`
`boolean`	`getTransacted()`	Indicates whether the session is in transacted mode.
`TransactionContext`	`getTransactionContext()`	Returns the transaction context of the session.
`MessageTransformer`	`getTransformer()`
`List<MessageDispatch>`	`getUnconsumedMessages()`
`boolean`	`hasUncomsumedMessages()`	Checks whether the session has unconsumed messages.
`boolean`	`isAsyncDispatch()`
`boolean`	`isAutoAcknowledge()`	Checks whether the session used auto acknowledgment.
`protected boolean`	`isClientAcknowledge()`	Checks whether the session used client acknowledgment.
`boolean`	`isClosed()`	Checks if the session is closed.
`boolean`	`isDupsOkAcknowledge()`	Checks whether the session used dup ok acknowledgment.
`boolean`	`isIndividualAcknowledge()`
`boolean`	`isInUse(ActiveMQTempDestination destination)`
`boolean`	`isRunning()`
`boolean`	`isSessionAsyncDispatch()`
`boolean`	`isTransacted()`	Checks whether the session uses transactions.
`void`	`recover()`	Stops message delivery in this session, and restarts message delivery with the oldest unacknowledged message.
`void`	`redispatch(ActiveMQDispatcher dispatcher, MessageDispatchChannel unconsumedMessages)`
`protected void`	`removeConsumer(ActiveMQMessageConsumer consumer)`	Remove the message consumer.
`protected void`	`removeProducer(ActiveMQMessageProducer producer)`	Removes a message producer.
`void`	`rollback()`	Rolls back any messages done in this transaction and releases any locks currently held.
`void`	`run()`	Optional operation, intended to be used only by Application Servers, not by ordinary JMS clients.
`protected void`	`send(ActiveMQMessageProducer producer, ActiveMQDestination destination, Message message, int deliveryMode, int priority, long timeToLive, MemoryUsage producerWindow, int sendTimeout, AsyncCallback onComplete)`	Sends the message for dispatch by the broker.
`protected void`	`sendAck(MessageAck ack)`
`protected void`	`sendAck(MessageAck ack, boolean lazy)`
`void`	`setAsyncDispatch(boolean asyncDispatch)`
`void`	`setBlobTransferPolicy(BlobTransferPolicy blobTransferPolicy)`	Sets the policy used to describe how out-of-band BLOBs (Binary Large OBjects) are transferred from producers to brokers to consumers
`void`	`setDeliveryListener(ActiveMQSession.DeliveryListener deliveryListener)`	Sets the message delivery listener.
`void`	`setMessageListener(MessageListener listener)`	Sets the session's distinguished message listener (optional).
`protected void`	`setOptimizeAcknowledge(boolean value)`
`protected void`	`setPrefetchSize(ConsumerId id, int prefetch)`
`void`	`setSessionAsyncDispatch(boolean sessionAsyncDispatch)`
`void`	`setTransactionContext(TransactionContext transactionContext)`	Sets the transaction context of the session.
`void`	`setTransformer(MessageTransformer transformer)`	Sets the transformer used to transform messages before they are sent on to the JMS bus or when they are received from the bus but before they are delivered to the JMS client
`protected void`	`start()`	Start this Session.
`protected void`	`stop()`	Stops this session.
`Response`	`syncSendPacket(Command command)`	Send the synchronous command.
`String`	`toString()`
`void`	`unsubscribe(String name)`	Unsubscribes a durable subscription that has been created by a client.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Field Detail
  - INDIVIDUAL_ACKNOWLEDGE
```
public static final int INDIVIDUAL_ACKNOWLEDGE
```
    Only acknowledge an individual message - using message.acknowledge() as opposed to CLIENT_ACKNOWLEDGE which acknowledges all messages consumed by a session at when acknowledge() is called
    
    See Also:
    
    Constant Field Values
  - MAX_ACK_CONSTANT
```
public static final int MAX_ACK_CONSTANT
```
    See Also:
    
    Constant Field Values
  - acknowledgementMode
```
protected int acknowledgementMode
```
  - connection
```
protected final ActiveMQConnection connection
```
  - info
```
protected final SessionInfo info
```
  - consumerIdGenerator
```
protected final LongSequenceGenerator consumerIdGenerator
```
  - producerIdGenerator
```
protected final LongSequenceGenerator producerIdGenerator
```
  - deliveryIdGenerator
```
protected final LongSequenceGenerator deliveryIdGenerator
```
  - executor
```
protected final ActiveMQSessionExecutor executor
```
  - started
```
protected final AtomicBoolean started
```
  - consumers
```
protected final CopyOnWriteArrayList<ActiveMQMessageConsumer> consumers
```
  - producers
```
protected final CopyOnWriteArrayList<ActiveMQMessageProducer> producers
```
  - closed
```
protected boolean closed
```
  - asyncDispatch
```
protected boolean asyncDispatch
```
  - sessionAsyncDispatch
```
protected boolean sessionAsyncDispatch
```
  - debug
```
protected final boolean debug
```
  - sendMutex
```
protected final Object sendMutex
```
  - redeliveryGuard
```
protected final Object redeliveryGuard
```
- Constructor Detail
  - ActiveMQSession
```
protected ActiveMQSession(ActiveMQConnection connection,
                          SessionId sessionId,
                          int acknowledgeMode,
                          boolean asyncDispatch,
                          boolean sessionAsyncDispatch)
                   throws JMSException
```
    Construct the Session
    
    Parameters:
    
    connection -
    
    sessionId -
    
    acknowledgeMode - n.b if transacted - the acknowledgeMode == Session.SESSION_TRANSACTED
    
    asyncDispatch -
    
    sessionAsyncDispatch -
    
    Throws:
    
    JMSException - on internal error
  - ActiveMQSession
```
protected ActiveMQSession(ActiveMQConnection connection,
                          SessionId sessionId,
                          int acknowledgeMode,
                          boolean asyncDispatch)
                   throws JMSException
```
    Throws:
    
    JMSException
- Method Detail
  - setTransactionContext
```
public void setTransactionContext(TransactionContext transactionContext)
```
    Sets the transaction context of the session.
    
    Parameters:
    
    transactionContext - - provides the means to control a JMS transaction.
  - getTransactionContext
```
public TransactionContext getTransactionContext()
```
    Returns the transaction context of the session.
    
    Returns:
    
    transactionContext - session's transaction context.
  - getStats
```
public StatsImpl getStats()
```
    Specified by:
    
    getStats in interface StatsCapable
    
    Returns:
    
    the Stats for this object
  - getSessionStats
```
public JMSSessionStatsImpl getSessionStats()
```
    Returns the session's statistics.
    
    Returns:
    
    stats - session's statistics.
  - createBytesMessage
```
public BytesMessage createBytesMessage()
                                throws JMSException
```
    Creates a BytesMessage object. A BytesMessage object is used to send a message containing a stream of uninterpreted bytes.
    
    Specified by:
    
    createBytesMessage in interface Session
    
    Returns:
    
    the an ActiveMQBytesMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createMapMessage
```
public MapMessage createMapMessage()
                            throws JMSException
```
    Creates a MapMessage object. A MapMessage object is used to send a self-defining set of name-value pairs, where names are String objects and values are primitive values in the Java programming language.
    
    Specified by:
    
    createMapMessage in interface Session
    
    Returns:
    
    an ActiveMQMapMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createMessage
```
public Message createMessage()
                      throws JMSException
```
    Creates a Message object. The Message interface is the root interface of all JMS messages. A Message object holds all the standard message header information. It can be sent when a message containing only header information is sufficient.
    
    Specified by:
    
    createMessage in interface Session
    
    Returns:
    
    an ActiveMQMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createObjectMessage
```
public ObjectMessage createObjectMessage()
                                  throws JMSException
```
    Creates an ObjectMessage object. An ObjectMessage object is used to send a message that contains a serializable Java object.
    
    Specified by:
    
    createObjectMessage in interface Session
    
    Returns:
    
    an ActiveMQObjectMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createObjectMessage
```
public ObjectMessage createObjectMessage(Serializable object)
                                  throws JMSException
```
    Creates an initialized ObjectMessage object. An ObjectMessage object is used to send a message that contains a serializable Java object.
    
    Specified by:
    
    createObjectMessage in interface Session
    
    Parameters:
    
    object - the object to use to initialize this message
    
    Returns:
    
    an ActiveMQObjectMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createStreamMessage
```
public StreamMessage createStreamMessage()
                                  throws JMSException
```
    Creates a StreamMessage object. A StreamMessage object is used to send a self-defining stream of primitive values in the Java programming language.
    
    Specified by:
    
    createStreamMessage in interface Session
    
    Returns:
    
    an ActiveMQStreamMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createTextMessage
```
public TextMessage createTextMessage()
                              throws JMSException
```
    Creates a TextMessage object. A TextMessage object is used to send a message containing a String object.
    
    Specified by:
    
    createTextMessage in interface Session
    
    Returns:
    
    an ActiveMQTextMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createTextMessage
```
public TextMessage createTextMessage(String text)
                              throws JMSException
```
    Creates an initialized TextMessage object. A TextMessage object is used to send a message containing a String.
    
    Specified by:
    
    createTextMessage in interface Session
    
    Parameters:
    
    text - the string used to initialize this message
    
    Returns:
    
    an ActiveMQTextMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createBlobMessage
```
public BlobMessage createBlobMessage(URL url)
                              throws JMSException
```
    Creates an initialized BlobMessage object. A BlobMessage object is used to send a message containing a URL which points to some network addressible BLOB.
    
    Parameters:
    
    url - the network addressable URL used to pass directly to the consumer
    
    Returns:
    
    a BlobMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createBlobMessage
```
public BlobMessage createBlobMessage(URL url,
                                     boolean deletedByBroker)
                              throws JMSException
```
    Creates an initialized BlobMessage object. A BlobMessage object is used to send a message containing a URL which points to some network addressible BLOB.
    
    Parameters:
    
    url - the network addressable URL used to pass directly to the consumer
    
    deletedByBroker - indicates whether or not the resource is deleted by the broker when the message is acknowledged
    
    Returns:
    
    a BlobMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createBlobMessage
```
public BlobMessage createBlobMessage(File file)
                              throws JMSException
```
    Creates an initialized BlobMessage object. A BlobMessage object is used to send a message containing the File content. Before the message is sent the file conent will be uploaded to the broker or some other remote repository depending on the getBlobTransferPolicy().
    
    Parameters:
    
    file - the file to be uploaded to some remote repo (or the broker) depending on the strategy
    
    Returns:
    
    a BlobMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - createBlobMessage
```
public BlobMessage createBlobMessage(InputStream in)
                              throws JMSException
```
    Creates an initialized BlobMessage object. A BlobMessage object is used to send a message containing the File content. Before the message is sent the file conent will be uploaded to the broker or some other remote repository depending on the getBlobTransferPolicy().
    
    The caller of this method is responsible for closing the input stream that is used, however the stream can not be closed until after the message has been sent. To have this class manage the stream and close it automatically, use the method createBlobMessage(File)
    
    Parameters:
    
    in - the stream to be uploaded to some remote repo (or the broker) depending on the strategy
    
    Returns:
    
    a BlobMessage
    
    Throws:
    
    JMSException - if the JMS provider fails to create this message due to some internal error.
  - getTransacted
```
public boolean getTransacted()
                      throws JMSException
```
    Indicates whether the session is in transacted mode.
    
    Specified by:
    
    getTransacted in interface Session
    
    Returns:
    
    true if the session is in transacted mode
    
    Throws:
    
    JMSException - if there is some internal error.
  - getAcknowledgeMode
```
public int getAcknowledgeMode()
                       throws JMSException
```
    Returns the acknowledgement mode of the session. The acknowledgement mode is set at the time that the session is created. If the session is transacted, the acknowledgement mode is ignored.
    
    Specified by:
    
    getAcknowledgeMode in interface Session
    
    Returns:
    
    If the session is not transacted, returns the current acknowledgement mode for the session. If the session is transacted, returns SESSION_TRANSACTED.
    
    Throws:
    
    JMSException
    
    Since:
    
    1.1 exception JMSException if there is some internal error.
    
    See Also:
    
    Connection.createSession(boolean,int)
  - commit
```
public void commit()
            throws JMSException
```
    Commits all messages done in this transaction and releases any locks currently held.
    
    Specified by:
    
    commit in interface Session
    
    Throws:
    
    JMSException - if the JMS provider fails to commit the transaction due to some internal error.
    
    TransactionRolledBackException - if the transaction is rolled back due to some internal error during commit.
    
    IllegalStateException - if the method is not called by a transacted session.
  - rollback
```
public void rollback()
              throws JMSException
```
    Rolls back any messages done in this transaction and releases any locks currently held.
    
    Specified by:
    
    rollback in interface Session
    
    Throws:
    
    JMSException - if the JMS provider fails to roll back the transaction due to some internal error.
    
    IllegalStateException - if the method is not called by a transacted session.
  - close
```
public void close()
           throws JMSException
```
    Closes the session.
    Since a provider may allocate some resources on behalf of a session outside the JVM, clients should close the resources when they are not needed. Relying on garbage collection to eventually reclaim these resources may not be timely enough.
    There is no need to close the producers and consumers of a closed session.
    This call will block until a receive call or message listener in progress has completed. A blocked message consumer receive call returns null when this session is closed.
    Closing a transacted session must roll back the transaction in progress.
    This method is the only Session method that can be called concurrently.
    Invoking any other Session method on a closed session must throw a JMSException.IllegalStateException. Closing a closed session must not throw an exception.
    
    Specified by:
    
    close in interface Session
    
    Throws:
    
    JMSException - if the JMS provider fails to close the session due to some internal error.
  - dispose
```
public void dispose()
             throws JMSException
```
    Throws:
    
    JMSException
  - configureMessage
```
protected void configureMessage(ActiveMQMessage message)
                         throws IllegalStateException
```
    Checks that the session is not closed then configures the message
    
    Throws:
    
    IllegalStateException
  - checkClosed
```
protected void checkClosed()
                    throws IllegalStateException
```
    Check if the session is closed. It is used for ensuring that the session is open before performing various operations.
    
    Throws:
    
    IllegalStateException - if the Session is closed
  - isClosed
```
public boolean isClosed()
```
    Checks if the session is closed.
    
    Returns:
    
    true if the session is closed, false otherwise.
  - recover
```
public void recover()
             throws JMSException
```
    Stops message delivery in this session, and restarts message delivery with the oldest unacknowledged message.
    All consumers deliver messages in a serial order. Acknowledging a received message automatically acknowledges all messages that have been delivered to the client.
    Restarting a session causes it to take the following actions:
    
    Stop message delivery
    Mark all messages that might have been delivered but not acknowledged as "redelivered"
    Restart the delivery sequence including all unacknowledged messages that had been previously delivered. Redelivered messages do not have to be delivered in exactly their original delivery order.
    Specified by:
    
    recover in interface Session
    
    Throws:
    
    JMSException - if the JMS provider fails to stop and restart message delivery due to some internal error.
    
    IllegalStateException - if the method is called by a transacted session.
  - getMessageListener
```
public MessageListener getMessageListener()
                                   throws JMSException
```
    Returns the session's distinguished message listener (optional).
    
    Specified by:
    
    getMessageListener in interface Session
    
    Returns:
    
    the message listener associated with this session
    
    Throws:
    
    JMSException - if the JMS provider fails to get the message listener due to an internal error.
    
    See Also:
    
    Session.setMessageListener(javax.jms.MessageListener), ServerSessionPool, ServerSession
  - setMessageListener
```
public void setMessageListener(MessageListener listener)
                        throws JMSException
```
    Sets the session's distinguished message listener (optional).
    When the distinguished message listener is set, no other form of message receipt in the session can be used; however, all forms of sending messages are still supported.
    If this session has been closed, then an IllegalStateException is thrown, if trying to set a new listener. However setting the listener to null is allowed, to clear the listener, even if this session has been closed prior.
    This is an expert facility not used by regular JMS clients.
    
    Specified by:
    
    setMessageListener in interface Session
    
    Parameters:
    
    listener - the message listener to associate with this session
    
    Throws:
    
    JMSException - if the JMS provider fails to set the message listener due to an internal error.
    
    See Also:
    
    Session.getMessageListener(), ServerSessionPool, ServerSession
  - run
```
public void run()
```
    Optional operation, intended to be used only by Application Servers, not by ordinary JMS clients.
    
    Specified by:
    
    run in interface Runnable
    
    Specified by:
    
    run in interface Session
    
    See Also:
    
    ServerSession
  - createProducer
```
public MessageProducer createProducer(Destination destination)
                               throws JMSException
```
    Creates a MessageProducer to send messages to the specified destination.
    A client uses a MessageProducer object to send messages to a destination. Since Queue and Topic both inherit from Destination, they can be used in the destination parameter to create a MessageProducer object.
    
    Specified by:
    
    createProducer in interface Session
    
    Parameters:
    
    destination - the Destination to send to, or null if this is a producer which does not have a specified destination.
    
    Returns:
    
    the MessageProducer
    
    Throws:
    
    JMSException - if the session fails to create a MessageProducer due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified.
    
    Since:
    
    1.1
  - createConsumer
```
public MessageConsumer createConsumer(Destination destination)
                               throws JMSException
```
    Creates a MessageConsumer for the specified destination. Since Queue and Topic both inherit from Destination, they can be used in the destination parameter to create a MessageConsumer.
    
    Specified by:
    
    createConsumer in interface Session
    
    Parameters:
    
    destination - the Destination to access.
    
    Returns:
    
    the MessageConsumer
    
    Throws:
    
    JMSException - if the session fails to create a consumer due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified.
    
    Since:
    
    1.1
  - createConsumer
```
public MessageConsumer createConsumer(Destination destination,
                                      String messageSelector)
                               throws JMSException
```
    Creates a MessageConsumer for the specified destination, using a message selector. Since Queue and Topic both inherit from Destination, they can be used in the destination parameter to create a MessageConsumer.
    A client uses a MessageConsumer object to receive messages that have been sent to a destination.
    
    Specified by:
    
    createConsumer in interface Session
    
    Parameters:
    
    destination - the Destination to access
    
    messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.
    
    Returns:
    
    the MessageConsumer
    
    Throws:
    
    JMSException - if the session fails to create a MessageConsumer due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified.
    
    InvalidSelectorException - if the message selector is invalid.
    
    Since:
    
    1.1
  - createConsumer
```
public MessageConsumer createConsumer(Destination destination,
                                      MessageListener messageListener)
                               throws JMSException
```
    Creates a MessageConsumer for the specified destination. Since Queue and Topic both inherit from Destination, they can be used in the destination parameter to create a MessageConsumer.
    
    Parameters:
    
    destination - the Destination to access.
    
    messageListener - the listener to use for async consumption of messages
    
    Returns:
    
    the MessageConsumer
    
    Throws:
    
    JMSException - if the session fails to create a consumer due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified.
    
    Since:
    
    1.1
  - createConsumer
```
public MessageConsumer createConsumer(Destination destination,
                                      String messageSelector,
                                      MessageListener messageListener)
                               throws JMSException
```
    Creates a MessageConsumer for the specified destination, using a message selector. Since Queue and Topic both inherit from Destination, they can be used in the destination parameter to create a MessageConsumer.
    A client uses a MessageConsumer object to receive messages that have been sent to a destination.
    
    Parameters:
    
    destination - the Destination to access
    
    messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.
    
    messageListener - the listener to use for async consumption of messages
    
    Returns:
    
    the MessageConsumer
    
    Throws:
    
    JMSException - if the session fails to create a MessageConsumer due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified.
    
    InvalidSelectorException - if the message selector is invalid.
    
    Since:
    
    1.1
  - createConsumer
```
public MessageConsumer createConsumer(Destination destination,
                                      String messageSelector,
                                      boolean noLocal)
                               throws JMSException
```
    Creates MessageConsumer for the specified destination, using a message selector. This method can specify whether messages published by its own connection should be delivered to it, if the destination is a topic.
    Since Queue and Topic both inherit from Destination, they can be used in the destination parameter to create a MessageConsumer.
    A client uses a MessageConsumer object to receive messages that have been published to a destination.
    In some cases, a connection may both publish and subscribe to a topic. The consumer NoLocal attribute allows a consumer to inhibit the delivery of messages published by its own connection. The default value for this attribute is False. The noLocal value must be supported by destinations that are topics.
    
    Specified by:
    
    createConsumer in interface Session
    
    Parameters:
    
    destination - the Destination to access
    
    messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.
    
    noLocal - - if true, and the destination is a topic, inhibits the delivery of messages published by its own connection. The behavior for NoLocal is not specified if the destination is a queue.
    
    Returns:
    
    the MessageConsumer
    
    Throws:
    
    JMSException - if the session fails to create a MessageConsumer due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified.
    
    InvalidSelectorException - if the message selector is invalid.
    
    Since:
    
    1.1
  - createConsumer
```
public MessageConsumer createConsumer(Destination destination,
                                      String messageSelector,
                                      boolean noLocal,
                                      MessageListener messageListener)
                               throws JMSException
```
    Creates MessageConsumer for the specified destination, using a message selector. This method can specify whether messages published by its own connection should be delivered to it, if the destination is a topic.
    Since Queue and Topic both inherit from Destination, they can be used in the destination parameter to create a MessageConsumer.
    A client uses a MessageConsumer object to receive messages that have been published to a destination.
    In some cases, a connection may both publish and subscribe to a topic. The consumer NoLocal attribute allows a consumer to inhibit the delivery of messages published by its own connection. The default value for this attribute is False. The noLocal value must be supported by destinations that are topics.
    
    Parameters:
    
    destination - the Destination to access
    
    messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.
    
    noLocal - - if true, and the destination is a topic, inhibits the delivery of messages published by its own connection. The behavior for NoLocal is not specified if the destination is a queue.
    
    messageListener - the listener to use for async consumption of messages
    
    Returns:
    
    the MessageConsumer
    
    Throws:
    
    JMSException - if the session fails to create a MessageConsumer due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified.
    
    InvalidSelectorException - if the message selector is invalid.
    
    Since:
    
    1.1
  - createQueue
```
public Queue createQueue(String queueName)
                  throws JMSException
```
    Creates a queue identity given a Queue name.
    This facility is provided for the rare cases where clients need to dynamically manipulate queue identity. It allows the creation of a queue identity with a provider-specific name. Clients that depend on this ability are not portable.
    Note that this method is not for creating the physical queue. The physical creation of queues is an administrative task and is not to be initiated by the JMS API. The one exception is the creation of temporary queues, which is accomplished with the createTemporaryQueue method.
    
    Specified by:
    
    createQueue in interface QueueSession
    
    Specified by:
    
    createQueue in interface Session
    
    Parameters:
    
    queueName - the name of this Queue
    
    Returns:
    
    a Queue with the given name
    
    Throws:
    
    JMSException - if the session fails to create a queue due to some internal error.
    
    Since:
    
    1.1
  - createTopic
```
public Topic createTopic(String topicName)
                  throws JMSException
```
    Creates a topic identity given a Topic name.
    This facility is provided for the rare cases where clients need to dynamically manipulate topic identity. This allows the creation of a topic identity with a provider-specific name. Clients that depend on this ability are not portable.
    Note that this method is not for creating the physical topic. The physical creation of topics is an administrative task and is not to be initiated by the JMS API. The one exception is the creation of temporary topics, which is accomplished with the createTemporaryTopic method.
    
    Specified by:
    
    createTopic in interface Session
    
    Specified by:
    
    createTopic in interface TopicSession
    
    Parameters:
    
    topicName - the name of this Topic
    
    Returns:
    
    a Topic with the given name
    
    Throws:
    
    JMSException - if the session fails to create a topic due to some internal error.
    
    Since:
    
    1.1
  - createDurableSubscriber
```
public TopicSubscriber createDurableSubscriber(Topic topic,
                                               String name)
                                        throws JMSException
```
    Creates a durable subscriber to the specified topic.
    If a client needs to receive all the messages published on a topic, including the ones published while the subscriber is inactive, it uses a durable TopicSubscriber. The JMS provider retains a record of this durable subscription and insures that all messages from the topic's publishers are retained until they are acknowledged by this durable subscriber or they have expired.
    Sessions with durable subscribers must always provide the same client identifier. In addition, each client must specify a name that uniquely identifies (within client identifier) each durable subscription it creates. Only one session at a time can have a TopicSubscriber for a particular durable subscription.
    A client can change an existing durable subscription by creating a durable TopicSubscriber with the same name and a new topic and/or message selector. Changing a durable subscriber is equivalent to unsubscribing (deleting) the old one and creating a new one.
    In some cases, a connection may both publish and subscribe to a topic. The subscriber NoLocal attribute allows a subscriber to inhibit the delivery of messages published by its own connection. The default value for this attribute is false.
    
    Specified by:
    
    createDurableSubscriber in interface Session
    
    Specified by:
    
    createDurableSubscriber in interface TopicSession
    
    Parameters:
    
    topic - the non-temporary Topic to subscribe to
    
    name - the name used to identify this subscription
    
    Returns:
    
    the TopicSubscriber
    
    Throws:
    
    JMSException - if the session fails to create a subscriber due to some internal error.
    
    InvalidDestinationException - if an invalid topic is specified.
    
    Since:
    
    1.1
  - createDurableSubscriber
```
public TopicSubscriber createDurableSubscriber(Topic topic,
                                               String name,
                                               String messageSelector,
                                               boolean noLocal)
                                        throws JMSException
```
    Creates a durable subscriber to the specified topic, using a message selector and specifying whether messages published by its own connection should be delivered to it.
    If a client needs to receive all the messages published on a topic, including the ones published while the subscriber is inactive, it uses a durable TopicSubscriber. The JMS provider retains a record of this durable subscription and insures that all messages from the topic's publishers are retained until they are acknowledged by this durable subscriber or they have expired.
    Sessions with durable subscribers must always provide the same client identifier. In addition, each client must specify a name which uniquely identifies (within client identifier) each durable subscription it creates. Only one session at a time can have a TopicSubscriber for a particular durable subscription. An inactive durable subscriber is one that exists but does not currently have a message consumer associated with it.
    A client can change an existing durable subscription by creating a durable TopicSubscriber with the same name and a new topic and/or message selector. Changing a durable subscriber is equivalent to unsubscribing (deleting) the old one and creating a new one.
    
    Specified by:
    
    createDurableSubscriber in interface Session
    
    Specified by:
    
    createDurableSubscriber in interface TopicSession
    
    Parameters:
    
    topic - the non-temporary Topic to subscribe to
    
    name - the name used to identify this subscription
    
    messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.
    
    noLocal - if set, inhibits the delivery of messages published by its own connection
    
    Returns:
    
    the Queue Browser
    
    Throws:
    
    JMSException - if the session fails to create a subscriber due to some internal error.
    
    InvalidDestinationException - if an invalid topic is specified.
    
    InvalidSelectorException - if the message selector is invalid.
    
    Since:
    
    1.1
  - createBrowser
```
public QueueBrowser createBrowser(Queue queue)
                           throws JMSException
```
    Creates a QueueBrowser object to peek at the messages on the specified queue.
    
    Specified by:
    
    createBrowser in interface QueueSession
    
    Specified by:
    
    createBrowser in interface Session
    
    Parameters:
    
    queue - the queue to access
    
    Returns:
    
    the Queue Browser
    
    Throws:
    
    JMSException - if the session fails to create a browser due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified
    
    Since:
    
    1.1
  - createBrowser
```
public QueueBrowser createBrowser(Queue queue,
                                  String messageSelector)
                           throws JMSException
```
    Creates a QueueBrowser object to peek at the messages on the specified queue using a message selector.
    
    Specified by:
    
    createBrowser in interface QueueSession
    
    Specified by:
    
    createBrowser in interface Session
    
    Parameters:
    
    queue - the queue to access
    
    messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.
    
    Returns:
    
    the Queue Browser
    
    Throws:
    
    JMSException - if the session fails to create a browser due to some internal error.
    
    InvalidDestinationException - if an invalid destination is specified
    
    InvalidSelectorException - if the message selector is invalid.
    
    Since:
    
    1.1
  - createTemporaryQueue
```
public TemporaryQueue createTemporaryQueue()
                                    throws JMSException
```
    Creates a TemporaryQueue object. Its lifetime will be that of the Connection unless it is deleted earlier.
    
    Specified by:
    
    createTemporaryQueue in interface QueueSession
    
    Specified by:
    
    createTemporaryQueue in interface Session
    
    Returns:
    
    a temporary queue identity
    
    Throws:
    
    JMSException - if the session fails to create a temporary queue due to some internal error.
    
    Since:
    
    1.1
  - createTemporaryTopic
```
public TemporaryTopic createTemporaryTopic()
                                    throws JMSException
```
    Creates a TemporaryTopic object. Its lifetime will be that of the Connection unless it is deleted earlier.
    
    Specified by:
    
    createTemporaryTopic in interface Session
    
    Specified by:
    
    createTemporaryTopic in interface TopicSession
    
    Returns:
    
    a temporary topic identity
    
    Throws:
    
    JMSException - if the session fails to create a temporary topic due to some internal error.
    
    Since:
    
    1.1
  - createReceiver
```
public QueueReceiver createReceiver(Queue queue)
                             throws JMSException
```
    Creates a QueueReceiver object to receive messages from the specified queue.
    
    Specified by:
    
    createReceiver in interface QueueSession
    
    Parameters:
    
    queue - the Queue to access
    
    Returns:
    
    a new QueueBrowser instance.
    
    Throws:
    
    JMSException - if the session fails to create a receiver due to some internal error.
    
    JMSException
    
    InvalidDestinationException - if an invalid queue is specified.
  - createReceiver
```
public QueueReceiver createReceiver(Queue queue,
                                    String messageSelector)
                             throws JMSException
```
    Creates a QueueReceiver object to receive messages from the specified queue using a message selector.
    
    Specified by:
    
    createReceiver in interface QueueSession
    
    Parameters:
    
    queue - the Queue to access
    
    messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.
    
    Returns:
    
    QueueReceiver
    
    Throws:
    
    JMSException - if the session fails to create a receiver due to some internal error.
    
    InvalidDestinationException - if an invalid queue is specified.
    
    InvalidSelectorException - if the message selector is invalid.
  - createSender
```
public QueueSender createSender(Queue queue)
                         throws JMSException
```
    Creates a QueueSender object to send messages to the specified queue.
    
    Specified by:
    
    createSender in interface QueueSession
    
    Parameters:
    
    queue - the Queue to access, or null if this is an unidentified producer
    
    Returns:
    
    QueueSender
    
    Throws:
    
    JMSException - if the session fails to create a sender due to some internal error.
    
    InvalidDestinationException - if an invalid queue is specified.
  - createSubscriber
```
public TopicSubscriber createSubscriber(Topic topic)
                                 throws JMSException
```
    Creates a nondurable subscriber to the specified topic.
    
    A client uses a TopicSubscriber object to receive messages that have been published to a topic.
    
    Regular TopicSubscriber objects are not durable. They receive only messages that are published while they are active.
    
    In some cases, a connection may both publish and subscribe to a topic. The subscriber NoLocal attribute allows a subscriber to inhibit the delivery of messages published by its own connection. The default value for this attribute is false.
    
    Specified by:
    
    createSubscriber in interface TopicSession
    
    Parameters:
    
    topic - the Topic to subscribe to
    
    Returns:
    
    TopicSubscriber
    
    Throws:
    
    JMSException - if the session fails to create a subscriber due to some internal error.
    
    InvalidDestinationException - if an invalid topic is specified.
  - createSubscriber
```
public TopicSubscriber createSubscriber(Topic topic,
                                        String messageSelector,
                                        boolean noLocal)
                                 throws JMSException
```
    Creates a nondurable subscriber to the specified topic, using a message selector or specifying whether messages published by its own connection should be delivered to it.
    
    A client uses a TopicSubscriber object to receive messages that have been published to a topic.
    
    Regular TopicSubscriber objects are not durable. They receive only messages that are published while they are active.
    
    Messages filtered out by a subscriber's message selector will never be delivered to the subscriber. From the subscriber's perspective, they do not exist.
    
    In some cases, a connection may both publish and subscribe to a topic. The subscriber NoLocal attribute allows a subscriber to inhibit the delivery of messages published by its own connection. The default value for this attribute is false.
    
    Specified by:
    
    createSubscriber in interface TopicSession
    
    Parameters:
    
    topic - the Topic to subscribe to
    
    messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.
    
    noLocal - if set, inhibits the delivery of messages published by its own connection
    
    Returns:
    
    TopicSubscriber
    
    Throws:
    
    JMSException - if the session fails to create a subscriber due to some internal error.
    
    InvalidDestinationException - if an invalid topic is specified.
    
    InvalidSelectorException - if the message selector is invalid.
  - createPublisher
```
public TopicPublisher createPublisher(Topic topic)
                               throws JMSException
```
    Creates a publisher for the specified topic.
    
    A client uses a TopicPublisher object to publish messages on a topic. Each time a client creates a TopicPublisher on a topic, it defines a new sequence of messages that have no ordering relationship with the messages it has previously sent.
    
    Specified by:
    
    createPublisher in interface TopicSession
    
    Parameters:
    
    topic - the Topic to publish to, or null if this is an unidentified producer
    
    Returns:
    
    TopicPublisher
    
    Throws:
    
    JMSException - if the session fails to create a publisher due to some internal error.
    
    InvalidDestinationException - if an invalid topic is specified.
  - unsubscribe
```
public void unsubscribe(String name)
                 throws JMSException
```
    Unsubscribes a durable subscription that has been created by a client.
    This method deletes the state being maintained on behalf of the subscriber by its provider.
    It is erroneous for a client to delete a durable subscription while there is an active MessageConsumer or TopicSubscriber for the subscription, or while a consumed message is part of a pending transaction or has not been acknowledged in the session.
    
    Specified by:
    
    unsubscribe in interface Session
    
    Specified by:
    
    unsubscribe in interface TopicSession
    
    Parameters:
    
    name - the name used to identify this subscription
    
    Throws:
    
    JMSException - if the session fails to unsubscribe to the durable subscription due to some internal error.
    
    InvalidDestinationException - if an invalid subscription name is specified.
    
    Since:
    
    1.1
  - dispatch
```
public void dispatch(MessageDispatch messageDispatch)
```
    Specified by:
    
    dispatch in interface ActiveMQDispatcher
  - acknowledge
```
public void acknowledge()
                 throws JMSException
```
    Acknowledges all consumed messages of the session of this consumed message.
    All consumed JMS messages support the acknowledge method for use when a client has specified that its JMS session's consumed messages are to be explicitly acknowledged. By invoking acknowledge on a consumed message, a client acknowledges all messages consumed by the session that the message was delivered to.
    Calls to acknowledge are ignored for both transacted sessions and sessions specified to use implicit acknowledgement modes.
    A client may individually acknowledge each message as it is consumed, or it may choose to acknowledge messages as an application-defined group (which is done by calling acknowledge on the last received message of the group, thereby acknowledging all messages consumed by the session.)
    Messages that have been received but not acknowledged may be redelivered.
    
    Throws:
    
    JMSException - if the JMS provider fails to acknowledge the messages due to some internal error.
    
    IllegalStateException - if this method is called on a closed session.
    
    See Also:
    
    Session.CLIENT_ACKNOWLEDGE
  - addConsumer
```
protected void addConsumer(ActiveMQMessageConsumer consumer)
                    throws JMSException
```
    Add a message consumer.
    
    Parameters:
    
    consumer - - message consumer.
    
    Throws:
    
    JMSException
  - removeConsumer
```
protected void removeConsumer(ActiveMQMessageConsumer consumer)
```
    Remove the message consumer.
    
    Parameters:
    
    consumer - - consumer to be removed.
    
    Throws:
    
    JMSException
  - addProducer
```
protected void addProducer(ActiveMQMessageProducer producer)
                    throws JMSException
```
    Adds a message producer.
    
    Parameters:
    
    producer - - message producer to be added.
    
    Throws:
    
    JMSException
  - removeProducer
```
protected void removeProducer(ActiveMQMessageProducer producer)
```
    Removes a message producer.
    
    Parameters:
    
    producer - - message producer to be removed.
    
    Throws:
    
    JMSException
  - start
```
protected void start()
              throws JMSException
```
    Start this Session.
    
    Throws:
    
    JMSException
  - stop
```
protected void stop()
             throws JMSException
```
    Stops this session.
    
    Throws:
    
    JMSException
  - getSessionId
```
protected SessionId getSessionId()
```
    Returns the session id.
    
    Returns:
    
    value - session id.
  - getNextConsumerId
```
protected ConsumerId getNextConsumerId()
```
    Returns:
    
    a unique ConsumerId instance.
  - getNextProducerId
```
protected ProducerId getNextProducerId()
```
    Returns:
    
    a unique ProducerId instance.
  - send
```
protected void send(ActiveMQMessageProducer producer,
                    ActiveMQDestination destination,
                    Message message,
                    int deliveryMode,
                    int priority,
                    long timeToLive,
                    MemoryUsage producerWindow,
                    int sendTimeout,
                    AsyncCallback onComplete)
             throws JMSException
```
    Sends the message for dispatch by the broker.
    
    Parameters:
    
    producer - - message producer.
    
    destination - - message destination.
    
    message - - message to be sent.
    
    deliveryMode - - JMS message delivery mode.
    
    priority - - message priority.
    
    timeToLive - - message expiration.
    
    producerWindow -
    
    onComplete -
    
    Throws:
    
    JMSException
  - doStartTransaction
```
protected void doStartTransaction()
                           throws JMSException
```
    Send TransactionInfo to indicate transaction has started
    
    Throws:
    
    JMSException - if some internal error occurs
  - hasUncomsumedMessages
```
public boolean hasUncomsumedMessages()
```
    Checks whether the session has unconsumed messages.
    
    Returns:
    
    true - if there are unconsumed messages.
  - isTransacted
```
public boolean isTransacted()
```
    Checks whether the session uses transactions.
    
    Returns:
    
    true - if the session uses transactions.
  - isClientAcknowledge
```
protected boolean isClientAcknowledge()
```
    Checks whether the session used client acknowledgment.
    
    Returns:
    
    true - if the session uses client acknowledgment.
  - isAutoAcknowledge
```
public boolean isAutoAcknowledge()
```
    Checks whether the session used auto acknowledgment.
    
    Returns:
    
    true - if the session uses client acknowledgment.
  - isDupsOkAcknowledge
```
public boolean isDupsOkAcknowledge()
```
    Checks whether the session used dup ok acknowledgment.
    
    Returns:
    
    true - if the session uses client acknowledgment.
  - isIndividualAcknowledge
```
public boolean isIndividualAcknowledge()
```
  - getDeliveryListener
```
public ActiveMQSession.DeliveryListener getDeliveryListener()
```
    Returns the message delivery listener.
    
    Returns:
    
    deliveryListener - message delivery listener.
  - setDeliveryListener
```
public void setDeliveryListener(ActiveMQSession.DeliveryListener deliveryListener)
```
    Sets the message delivery listener.
    
    Parameters:
    
    deliveryListener - - message delivery listener.
  - getSessionInfo
```
protected SessionInfo getSessionInfo()
                              throws JMSException
```
    Returns the SessionInfo bean.
    
    Returns:
    
    info - SessionInfo bean.
    
    Throws:
    
    JMSException
  - asyncSendPacket
```
public void asyncSendPacket(Command command)
                     throws JMSException
```
    Send the asynchronous command.
    
    Parameters:
    
    command - - command to be executed.
    
    Throws:
    
    JMSException
  - syncSendPacket
```
public Response syncSendPacket(Command command)
                        throws JMSException
```
    Send the synchronous command.
    
    Parameters:
    
    command - - command to be executed.
    
    Returns:
    
    Response
    
    Throws:
    
    JMSException
  - getNextDeliveryId
```
public long getNextDeliveryId()
```
  - redispatch
```
public void redispatch(ActiveMQDispatcher dispatcher,
                       MessageDispatchChannel unconsumedMessages)
                throws JMSException
```
    Throws:
    
    JMSException
  - isRunning
```
public boolean isRunning()
```
  - isAsyncDispatch
```
public boolean isAsyncDispatch()
```
  - setAsyncDispatch
```
public void setAsyncDispatch(boolean asyncDispatch)
```
  - isSessionAsyncDispatch
```
public boolean isSessionAsyncDispatch()
```
    Returns:
    
    Returns the sessionAsyncDispatch.
  - setSessionAsyncDispatch
```
public void setSessionAsyncDispatch(boolean sessionAsyncDispatch)
```
    Parameters:
    
    sessionAsyncDispatch - The sessionAsyncDispatch to set.
  - getTransformer
```
public MessageTransformer getTransformer()
```
  - getConnection
```
public ActiveMQConnection getConnection()
```
  - setTransformer
```
public void setTransformer(MessageTransformer transformer)
```
    Sets the transformer used to transform messages before they are sent on to the JMS bus or when they are received from the bus but before they are delivered to the JMS client
  - getBlobTransferPolicy
```
public BlobTransferPolicy getBlobTransferPolicy()
```
  - setBlobTransferPolicy
```
public void setBlobTransferPolicy(BlobTransferPolicy blobTransferPolicy)
```
    Sets the policy used to describe how out-of-band BLOBs (Binary Large OBjects) are transferred from producers to brokers to consumers
  - getUnconsumedMessages
```
public List<MessageDispatch> getUnconsumedMessages()
```
  - toString
```
public String toString()
```
    Overrides:
    
    toString in class Object
  - checkMessageListener
```
public void checkMessageListener()
                          throws JMSException
```
    Throws:
    
    JMSException
  - setOptimizeAcknowledge
```
protected void setOptimizeAcknowledge(boolean value)
```
  - setPrefetchSize
```
protected void setPrefetchSize(ConsumerId id,
                               int prefetch)
```
  - close
```
protected void close(ConsumerId id)
```
  - isInUse
```
public boolean isInUse(ActiveMQTempDestination destination)
```
  - getLastDeliveredSequenceId
```
public long getLastDeliveredSequenceId()
```
    highest sequence id of the last message delivered by this session. Passed to the broker in the close command, maintained by dispose()
    
    Returns:
    
    lastDeliveredSequenceId
  - sendAck
```
protected void sendAck(MessageAck ack)
                throws JMSException
```
    Throws:
    
    JMSException
  - sendAck
```
protected void sendAck(MessageAck ack,
                       boolean lazy)
                throws JMSException
```
    Throws:
    
    JMSException
  - getScheduler
```
protected Scheduler getScheduler()
                          throws JMSException
```
    Throws:
    
    JMSException
  - getConnectionExecutor
```
protected ThreadPoolExecutor getConnectionExecutor()
```

Class ActiveMQSession

Nested Class Summary

Field Summary

Fields inherited from interface javax.jms.Session

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

INDIVIDUAL_ACKNOWLEDGE

MAX_ACK_CONSTANT

acknowledgementMode

connection

info

consumerIdGenerator

producerIdGenerator

deliveryIdGenerator

executor

started

consumers

producers

closed

asyncDispatch

sessionAsyncDispatch

debug

sendMutex

redeliveryGuard

Constructor Detail

ActiveMQSession

ActiveMQSession

Method Detail

setTransactionContext

getTransactionContext

getStats

getSessionStats

createBytesMessage

createMapMessage

createMessage

createObjectMessage

createObjectMessage

createStreamMessage

createTextMessage

createTextMessage

createBlobMessage

createBlobMessage

createBlobMessage

createBlobMessage

getTransacted

getAcknowledgeMode

commit

rollback

close

dispose

configureMessage

checkClosed

isClosed

recover

getMessageListener

setMessageListener

run

createProducer

createConsumer

createConsumer

createConsumer

createConsumer

createConsumer

createConsumer

createQueue

createTopic

createDurableSubscriber

createDurableSubscriber

createBrowser

createBrowser

createTemporaryQueue

createTemporaryTopic

createReceiver

createReceiver

createSender

createSubscriber

createSubscriber

createPublisher